Signal isolator|Signal isolator ic|Signal isolator module|SUNYUAN technology factory

Product Display

Your location：Home>>Product Display

6.DIN 1X1 ISO 4-20mA-E (LED1) active load two-wire 4-20mA current loop display control isolation conditioner

DIN35 Rail-mounted can use active load to adjust the two-wire 4-20mA current loop four digit LED display control and alarm output isolation conditioner....
6.Fixed voltage input, unregulated output, 3KV meter interface, isolated power supply: FXXXXS/D-W1/2W series

The low cost single output 3KVAC isolation DC-DC converter module is mainly used for digital interface power isolation such as RS232/RS485/CAN bus of power equipment....
6.8-channel/16-channel anti-interference input channel isolated smart sensor module: ISO AD 08/16 series

Bus industrial automation control system analog signal acquisition and measurement, sensor and instrumentation/PLC/DCS control system monitoring and remote distortion-free transmission....
6.Low cost and small size non-isolated two-wire 4-20mA analog quantity acquisition and conditioner SY 4-20mA-P series

Two-wire 4-20mA analog quantity acquisition and conditioner,it have IC package PCB board-mounted and DIN35 rail-mounted packaging for options....
7.DIN 1X1 ISOEM (LED1) series analog DC voltage (current) signal magnetic isolation display control transmitter

Sensors and instrumentation/PLC/DCS analog signal intelligent isolation amplifier transmitter with four LED display control and alarm output functions....
7.Fixed voltage input power meter 6KVAC high isolation unregulated power supply : G/HXXXXS-1W/2W series

According to the national electric power industry standard DL/T614-1997, DL/T614-2007, the production of high isolation module power supply with RS485 interface for electric instruments and meters....
7.Low cost analog quantity to RS232/485 signal, multi-input common ground type bus smart sensor : SY AD 02/04/08 series

The communication method adopts ASCII code character communication protocol or MODBUS RTU communication protocol, the instruction set is compatible with ADAM module, and the baud rate can be set by the user....
7.Two-wire passive loop-fed analog signal isolation transmitter：ISO U-O/ISO A-O/ISO R-O

Two-wire passive voltage, current and resistance conversion (VI/IV/RO) signal isolator ,it have IC package PCB board-mounted and DIN35 rail-mounted packaging for options....
8.Intelligent display control transmitter button operation instructions

Sunyuan Technology Two-wire 4-20mA display control and alarm output type four-digit LED digital display key operation manual....
8.Fixed voltage input 1KV isolation with regulated positive and negative dual output power supply module: IAXXXX1W/2W/3W series

Fixed voltage input 1KV isolated positive and negative voltage stabilized dual output dc/dc converter is used in instrumentation/amplifier circuit dedicated ground wire isolation anti-interference power supply....

Website home page

Product Display

Qualification Certificate

Application Information

Business Consulting

Telephone：0086-755-83100080 / 83100110 / 83150723

Fax：0086-755-83116652

mailbox：sy@sunyuansz.net

address：Floor 2, building 6, East 1st Industrial Park, Zhonghuan Road, Minzhi street, Longhua District, Shenzhen

Copyright©2013-2021 Shunyuan Technology All Rights Reserved copyright 粤ICP05061957号