Signal isolator|Signal isolator ic|Signal isolator module|SUNYUAN technology factory

Smart sensor

Your location：Home>>Product Display>>Smart sensor

1.4-20mA/0-5V to RS232/RS485 smart sensor (analog to digital signal AD conversion isolation transmitter): ISO 4021 series

There are power isolation/signal isolation/linearization A/D conversion and RS485 serial communication inside. Each serial port can connect up to 256pcs of 4021 series modules....
2.RS232/RS485 to 4-20mA/0-10V smart sensor (digital signal to analog DA conversion isolation transmitter): ISO DA series

Bus RS232/RS485 signal to analog 4-20mA/0-10V signal isolation converter (digital signal to analog DA conversion isolation transmitter)....
3.4-20mA/0-5V to RS232/RS485 analog to digital intelligent display smart sensor: ISO 4021 (LED1) series

The analog signal is isolated and amplified by AD conversionIt also has the function of signal display and control, and uses the field bus to isolate and transmit the analog signal of the equipment and intelligently control it....
4.Bus RS232/RS485 to 4-20mA/0-10V digital to analog intelligent display smart sensor : ISO DA (LED1) series

Bus RS232/485 signal DA conversion isolation and signal display control function,Use analog signals to remotely intelligently control the system through fieldbus....
5.2-channel/4-channel anti-interference input channel isolated smart sensor module: ISO AD 02/04 series

The signal between each input channel is completely independent isolation (not common ground), and the signal input/output in each independent channel is 3KV isolation, which has strong anti-interference ability....
6.8-channel/16-channel anti-interference input channel isolated smart sensor module: ISO AD 08/16 series

Bus industrial automation control system analog signal acquisition and measurement, sensor and instrumentation/PLC/DCS control system monitoring and remote distortion-free transmission....
7.Low cost analog quantity to RS232/485 signal, multi-input common ground type bus smart sensor : SY AD 02/04/08 series

The communication method adopts ASCII code character communication protocol or MODBUS RTU communication protocol, the instruction set is compatible with ADAM module, and the baud rate can be set by the user....
8.Multi-input common ground type bus smart sensor module with temperature detection function: SYAD C series

SY ADC only supports DS18B20 auxiliary power supply mode, and does not support parasitic power mode. The communication supports two modes of ASCII code and MODBUS RTU....
9.Ethernet/IOT analog signal acquisition smart sensor: SY AD 02/04/08-RJ45 series

RJ45 interface IOT Ethernet integrated system and RS232/485 bus system 4-20mA/0-10V analog quantity acquisition, measurement, monitoring and long-term transmission....
10.IOT/Ethernet digital signal acquisition isolation transmitter smart sensor: SY DDN—RJ45 /RS485 series

RJ45 interface IOT Ethernet integrated system and RS232/485 bus system TTL switch digital signal acquisition, measurement, monitoring and long-term transmission....

Website home page

Product Display

Qualification Certificate

Application Information

Business Consulting

Telephone：0086-755-83100080 / 83100110 / 83150723

Fax：0086-755-83116652

mailbox：sy@sunyuansz.net

address：Floor 2, building 6, East 1st Industrial Park, Zhonghuan Road, Minzhi street, Longhua District, Shenzhen

Copyright©2013-2021 Shunyuan Technology All Rights Reserved copyright 粤ICP05061957号