SunYuan technology development and production of energy meters dedicated 6KVAC high isolation anti-static DC/DC converter, is a high electrical isolation and anti-surge, anti-static characteristics, and the output of the output has a self-recovery overload and short-circuit and 8KV anti-static protection function of the national patent products (Patent No.: ZL 200420042857.1).Recently, this product has successfully passed the high isolation/anti-surge/anti-static test in the technical inspection related to the safety of the external RS485/RS232 interface of the power load management control terminal (user management terminal) instrument with high isolation (4500V) and anti-static (direct contact of the external terminal: 8000V). At present, it has been widely used in the power instrumentation manufacturing industry.

   Typical applications of DC-DC power modules (modular power supply), voltage polarity conversion, selection of external filter capacitors, overload and short-circuit protection circuits and series-parallel use are described in detail. Correct use can extend the service life of the product to avoid interference, overheating, self-excitation, poor start-up and other phenomena and irreparable damage.

Product Technical Parameters

Input Voltage　　　　　　　　　　

5, 12, 15, 24 VDC

Output Voltage　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　

3.3,5,9,12,15VDC

For other specifications, please consult with Shunyuan Technology Co.

Electrical Characteristics

The following data are measured at TA=25° C, nominal input voltage, and rated output current unless otherwise noted.

Input Characteristics

Voltage Range +/- 10%* nominal 

Filtering Ceramic Capacitors

Isolation Characteristics

Voltage 6000 VAC

Leakage Current 1 mA

Resistance 109 Ohm

Capacitance 60 pF type.

Output Characteristics

Electrostatic rating ≥8000V

Voltage Accuracy +/- 2%* Nominal Max.

( 20 MHz BW) Ripple and Noise 50mV p-p, max. 

Sustained short-circuit time Long-term

Linear Voltage Calibration +/- 1.2% / 1.0% of Vin

Load Voltage Calibration +/- 8 %, load = 20 ~ 100

Temperature Coefficient +/- 0.02%/°C  

General Characteristics

Efficiency 70% to 80  

Switching Frequency 80 - 125KHz  

Environmental Characteristics

Operating temperature (ambient) - 40° C to + 85° C  

Storage temperature - 55 °C to + 125 °C  

Reduced nominal value See temperature characteristics graph

Humidity ≤ 90%, uncompressed

Cooling method Natural air cooling

Volume Characteristics

SIP package size 19.50 x 9.80 x 12.50 mm

                          0.77 x 0.39 x 0.49 in.

Weight 4 - 6 g

Case Material Non-Conductive Flame Retardant Black Plastic

Power meter power management terminal RS485 interface 8KV anti-static 6KV high isolation single regulator short circuit protection output module power supply: WRH series